Who Does the Work
We work on garage doors and openers in Ham Lake and the surrounding area, nothing else. No siding, no windows, no general handyman work. Most of the houses we're called to were built between 1960 and 2003, with the bulk of the stock going up through the 1980s and 90s, which means a lot of the doors and openers we see are either original equipment near the end of its life or a mid-90s replacement that's due for new rollers, cable, or a spring swap.
We price jobs based on what's actually on the door, not a guess over the phone. If you tell us the brand, the age, and what it's doing (or not doing), we can usually give you a range before we show up, and a firm number once we're standing in front of it. A torsion spring job on a standard double door in a Ham Lake garage is priced differently than the same repair on an older single door with side-mounted hardware, and we'd rather tell you that up front than surprise you on the invoice.
We serve Ham Lake directly and the towns around it, including Columbus, Circle Pines, Centerville, and Spring Lake Park. If you're closer to Oak Grove or East Bethel, call first and we'll confirm the trip works for your schedule.
Work We Turn Down
We don't price a repair sight unseen when the door has been hit by a vehicle, has a bent track, or the panels are visibly racked out of square. Those jobs need eyes on them before a number means anything, because what looks like a track repair sometimes turns out to be a bent section that no amount of adjusting will fix.
We also won't quote a full opener replacement over the phone if you don't know the brand or the horsepower, because the wrong unit on the wrong door is a comeback call for both of us. And if a door is old enough that parts for it are genuinely hard to source, we'll tell you that replacement is the better call rather than stringing out a repair that won't hold through a Minnesota winter.
We don't do new construction installs as a standalone service, and we don't work on doors that aren't garage doors, commercial rolling steel included. If your situation falls outside what we do, we'll say so instead of taking the job anyway.
What We Are Called Out For
The cold here does specific damage. Our winters sit in the severe end of the cold climate band, and that means broken torsion springs from stiff, cold-contracted steel, openers that strain or stall trying to lift a door that's iced to the slab, and nylon rollers that crack in single-digit temperatures and start throwing the door off track.
With median household income in the service area around $100,011 and most homes owner-occupied rather than rented, we see a fair number of calls for full door and opener replacement rather than patchwork repair, especially on doors original to houses built in the 1980s median era. Those original one-piece doors often run torsion hardware that newer parts don't fit cleanly, so a quote on one of those jobs usually includes hardware, not just a door.
We also get the simpler calls: a cable that's frayed and about to snap, a sensor that's been knocked out of alignment, a remote that's stopped talking to the opener. Those are quick to price once we know the brand and age.
Contacting Us
Call (763) 298-0981 and tell us what the door is doing, what brand it is if you know it, and roughly how old it is. That's enough for us to give you a starting range. For anything involving physical damage - a bent panel, a door off its track, a section that's cracked - we'll want to see it before we commit to a number, because guessing on damage costs you more in the long run than a short delay for a look.
We're based at 13352 Aberdeen St NE, Ham Lake, MN 55304, and we run calls out from there across the area. If you'd rather start online, our site is at /.
Frequently asked questions
Can you give me a price over the phone?
For straightforward jobs like a broken spring, a bad opener capacitor, or a cable replacement, yes, once we know the brand and rough age of the door. For anything involving physical damage to panels or track, we need to see it in person before the number means anything.
Do you work outside Ham Lake?
Yes. We cover the surrounding area including Columbus, Circle Pines, Centerville, and Spring Lake Park. If you're farther out, toward Oak Grove, East Bethel, or Wyoming, call and we'll confirm the trip fits our route that day.
My door is original to the house. Is it worth repairing?
Depends on the hardware. A lot of Ham Lake homes date to the 1980s and run original torsion setups that newer parts don't always fit cleanly. Sometimes a repair holds fine, sometimes replacement is the honest answer. We'll tell you which once we've looked at it.
Why won't you quote a bent track repair without seeing it?
Because a bent track can mean anything from a loose bracket to a fully racked door frame, and those two jobs are priced very differently. Quoting blind on damage usually means a second visit and a revised number, which wastes your time more than ours.